This unique Packet Capture Appliance is ideal for Security and Forensic applications because it is capable of analyzing ALL packets in a full duplex live line, while capturing those that are compliant with a trigger condition, or with any of the 15+15 programmable filters. Suspicion packets can either be saved in a local hard disk drive -at wirespeed- either be tapped to a LAN. Operations are executed at FULL bit rate in both directions [Tx+Rx] with ZERO delay [ns] and ZERO loss to the live traffic.
The CTIA Emerging Technology (E-Tech) Awards program honors the industry's innovative new products and services in mobile apps, consumer electronics, enterprise & vertical markets and network technology. Net.Hunter has been nominated in the Security, Fraud & Privacy category, as a product indicated to protect infrastructure and customers against outside threats.
CODE |
DESCRIPTION |
AT.NHunterk.HH |
Net.Hunter hand-held. Battery operated capture device including 2 Line ports (SFP interfaces supporting 10BASE-T, 100BASE-TX, 100BASE-FX, 1000BASE-T, 1000BASE-SX, 1000BASE-LX, 1000BASE-ZX), 2 Mirror ports (RJ45 interfaces including 10BASE-T, 100BASE-TX, 1000BASE-T), aggregation function in one mirror port, storage in internal high speed SDD in PCAP / PCAPNG format with hardware timestamps. Includes AC/DC adapter, transportation bag, two units of RJ45 SFP transceiver (10BASE-T, 100BASE-TX, 1000BASE-T).
[REQUIRES: AT.NHunter.SSD120]
|
AT.NHunter.SSD120 |
SSD 120 GB: Internal Solid State Drive with capacity 120GB - Need to be purchased with the Net.Hunter base unit for line speed capturing. |
AT.NHunter.NS |
Network Search. Automatic detection of up 16 most frequent streams listed by IPV4, IPV6, VLAN and MAC. |
AT.NHunter.POE |
Power over Ethernet bridge. PoE / PoE+ pass through as per IEEE 802.3af and IEEE 802.3at. |
AT.VNC.RC |
Graphical Remote Control. Based on VNC for Windows and Linux. Ethernet/IP remote control that duplicates the tester graphical user interface in a remote computer. |
AT.SNMP.RC |
SNMP Remote Control and Automation. Based on SNMP protocol allows user to control the tester remotelly using SNMP queries. |
AT.Wi-Fi.RC |
Wi.Fi USB. Remote Control wireless interface to be used together with VNC.
[REQUIRES: AT.VNC.RC] |
AT.1000Sx.SFP |
SFP Adapter. 1.25 Gbps SFP, 850 nm, MMF, 500 m reach, w/ DDM, Duplex LC, 0 - 70ªC |
AT.1000Lx.SFP |
SFP Adapter. 1.25 Gbps SFP, 1310 nm, SMF, 20 Km reach, w/ DDM, Duplex LC, 0 - 70ªC |
AT.1000Zx.SFP |
SFP Adapter. 1.25 Gbps SFP, 1550 nm, SMF, 80 Km reach, w/ DDM, Duplex LC, 0 - 70ªC |
AT.Elect.SFP |
SFP Adapter. 10/100/1000BT Electrical SFP transceiver, SGMII, 0 – 70ºC |
AT.100Fx.SFP |
SFP Adapter 100FX. 125 Mbps SFP, 1310 nm, MMF, 2Km reach, w/ DDM, SGMII, Duplex LC, 0 – 70ºC |
AT.20 |
Car charger. Power adapter to charge the test unit from car battery. |
AT.Lipo.Batt |
Additional Lipo battery. |
 |
 |